VEHICLE SECURITY SWITCHES
| BWS260P |
|
Black Widow plug-in, Momentary, Valet Switch (normally open) with 25" wire leads. | $4.95 CDN |
| DLRS |
|
Door lock switch momentary ON, SPDT, center OFF. | $8.95 CDN |
| MR1 |
|
Magnetic reed switch normally open/Normally closed. | $9.95 CDN |
| MR2 |
|
Magnetic reed switch normally open. Twelve inch leads. Adhesive mounting. | $9.95 CDN |
| MR3 |
|
Mercury tilt switch. Has a variety of security applications such as hood and trunk protection. Comes with self adhesive strip or epoxy can be applied to any surface for strong adhesion. Plastic case with 36" lead. | $9.95 CDN |
| PS140VD |
|
Double pin switch for sliding van doors with matching plate which can be easily mounted between door and door post. | $17.95 CDN |
| PS1 |
|
Pin switch accepts .156" diameter male bullet connector. 2-5/8" long. | $4.95 CDN |
| PS2L |
|
Long pin switch accepts .156" diameter male bullet connector. Length: 2 5/8". | $4.95 CDN |
| PS4N |
|
Nylon tipped pin switch accepts .156" diameter male bullet connector. 2" Length. | $4.95 CDN |
| PSA01 |
|
Short pin switch 2" length. Adjustable head allows plunger height adjustment. | $4.95 CDN |
| PSA02 |
|
Long pin switch 2-1/2" adjustment head allows plunger height adjustment. | $4.95 CDN |
| PSA05 |
|
Fully adjustable deluxe pin switch with nylon plunger. Heavy steel mounting plate and .250" male quick connector. Length: 1-5/8" | $5.95 CDN |
| PSP10 |
|
Pin switch with tough polycarbonate plunger and stainless steel shaft. Nickel plated body. Tin-plated brass QC terminal. Cut to desired length. Weatherproof rubber boot. | $6.95 CDN |
| PSP11 |
|
Harrison pin switch with vertical flange mount for a wide variety of under-hood applications on utility vehicles, RV's, trucks or exterior mounted storage compartments. | $5.95 CDN |
| PSP12 |
|
All nylon shafted pin switch. Accepts male bullet connector. | $4.95 CDN |
| PSP2 |
|
Universal switch with .250" male disconnect on 6" wire lead. | $4.95 CDN |
| PSP3 |
|
Unique design features. Absence of any extension on inside when plunger is depressed and 360 degree rotation of .250" male disconnect. One time adjustment. | $7.95 CDN |
| PSP4 |
|
Harrison pin switch with tough polycarbonate plunger & stainless steel shaft. Nickel plated body, tin plated brass QC terminal. Cut to length. | $4.95 CDN |
| PSP5 |
|
Pin switch flange mounted, polycarbonate shaft. Copper QC terminal. | $4.95 CDN |
| PSP8 |
|
One screw mounting. .250" terminals. Rubber grommet fits between vehicle and switch for better seal. (13 & 15mm) | $5.95 CDN |
| PSBL |
|
Right angle pin switch bracket. | $4.95 CDN |
| PSB |
|
Flat pin switch bracket. | $4.95 CDN |
| RBS1 |
|
Used where pin or switch could break. (i.e. sliding windows, van doors, truck tail gates, hatchbacks, etc.) Normally closed, 3/4" diameter, 1-1/2" deep. Omni-directional. | $21.95 CDN |
EDAP
#6 - 31580 SOUTH FRASER WAY
ABBOTSFORD, BC CANADA
PHONE: (604) 832-8029
